FANVIL GA10-ANALOG VoIP gateway True-Tech
The FANVIL GA10-ANALOG VoIP gateway features;
Generic
- 2 SIP lines
- HD voice
- Desktop / wall-mounted
- Support USB port or power adapter for power supply
Phone Functions
- Caller ID display
- Direct IP Dialing
- Anonymous call (hide caller ID)
- Call hold / resume
- Call waiting
- Call forward (Always/Busy/No Answer)
- Call Transfer (Attended/Unattended)
- Do-Not-Disturb
- Voice message waiting indication (MWI)
- Blocked list / allowed list
- 3-way conference
- Hot line
Audio
- Narrowband codec: G.711a/u, G.726, G.729A/B, iLBC
- Wideband codec: G.722, Opus
- Acoustic Echo Canceller (AEC) Voice Activity Detection (VAD) / Comfort Noise Generation (CNG) / Noise Reduction (NR) / Automatic Gain Control (AGC)
- Packet Loss Concealment (PLC)
- Dynamic adaptive jitter buffer
- DTMF: In-band
- Support the signal tone of different countries or regions
FXS features
- Response detection
- Busy tone detection
- Incoming call detection
- Polarity detection
- Hang up detection
- Disconnect Methods: Busy Tone, Polarity Reversal
- Signalling: Kewl Start, Loop Start
Network
- Physical: 10/100Mbps Ethernet
- IP Mode: IPv4/IPv6/IPv4 & IPv6
- IP Configuration: Static IP / DHCP / PPPoE
- Firewall
- VLAN
- Gift box dimensions: 150x125x55 mm
- QoS
- Wifi: NA
Protocols
- SIP2.0 over UDP/TCP/TLS
- RTP/RTCP/SRTP
- STUN
- DHCP
- CDP
- PPPoE
- SNTP
- FTP/TFTP
- HTTP/HTTPS
- TR-069
Deployment & Management
- Auto-provisioning via FTP/TFTP/HTTP/HTTPS/DHCP OPT66/SIPPNP/TR-069
- Voice menu for basic configuration
- Web management portal
- Web-based packet dump
- Configuration export / import
- Phonebook import/export
- Backup and recovery
- Firmware upgrade
- Syslog
Physical Specifications
- Power adapter x1
- 1.5M CAT.5E ethernet cable x1
- Reset key x1
- Status indicator light x4: power/network/SIP state/call
- FXS port x1: RJ11 x1
- Network port x1: RJ45 x1
- USB port x1: Micro USB x1 (Only power input is supported)
- DC port x1: Φ5.5×2.1x10mm
- DC power input: DC5V/1A
- Working temperature: 0~45℃
- Working humidity: 10~95%
- Installation: Desktop or Wall-mounted
- Qty/CTN: 20 pcs
- N.W/CTN: 4.5 kg
- G.W/CTN: 5.15 kg
- Power Consumption(Adapter): 0.84~5.71W
- Color: black
- Device dimensions: 85x68x22.7 mm
- Outer CTN dimensions: 300x272x330 mm(20 PCS)
Reviews
There are no reviews yet.