D-Link DGS-1210-48 48-Port Gigabit Managed-Switch
The D-Link DGS-1210-48 48-Port Gigabit Managed-Switch has the following features:
- (48) Gigabit (10/100/1000BASE-T) ports.
- Also has Four (4) Combo 10/100/1000BASE-T/SFP ports.
- Auto MDI/MDIX adjustment for all twisted-pair ports.
- 104 Gbps Switching Capacity.
D-Link DGS-1210-48 48-Port Gigabit Managed-Switch True-Tech
The D-Link DGS-1210-48 48-Port Gigabit Managed-Switch comes with (48) Gigabit (10/100/1000BASE-T) ports.
In addition it also has Four (4) Combo 10/100/1000BASE-T/SFP ports.
Equally important it supports Auto MDI/MDIX adjustment for all twisted-pair ports.
Product Specifications:
| General: | |
|---|---|
| Port Standards & Functions: | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3x Flow Control for Full-Duplex Mode Auto-negotiation |
| Number of Ports: | 48 Gigabit (10/100/1000BASE-T) ports 4 Combo 10/100/1000BASE-T/SFP ports |
| Network Cables: | UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.) |
| Full/Half Duplex: | Full/half duplex for 10/100 Mbps speeds Full duplex for Gigabit speed |
| Media Interface Exchange: | Auto or configurable MDI/MDIX |
| Performance: | |
|---|---|
| Switching Capacity: | Has a 104 Gbps Switching Capacity |
| Transmission Method: | Store-and-forward |
| MAC Address Table: | 16K entries per device |
| MAC Address Update: | Up to 256 static MAC entries Enable/disable auto-learning of MAC addresses |
| Maximum 64 bytes Packet Forwarding Rate: | 77.4 Mpps |
| Packet Buffer Memory: | 12 Mbits |
| Physical & Environment: | |
|---|---|
| AC Input: | 100 to 240 VAC 50/60 Hz internal universal power supply |
| Maximum Power Consumption: | 34.2 W |
| Standby Power Consumption: | 13.9 W |
| Fan Quantity: | None |
| Acoustics: | 0 dB(A) |
| Heat Dissipation: | 116.7 BTU/hr |
| Operation Temperature: | -5 to 50 ˚C (23 to 122 ˚F) |
| Storage Temperature: | -20 to 70˚C (-4 to 158 ˚F) |
| Operation Humidity: | 0% to 95% non-condensing |
| Storage Humidity: | 0% to 95% non-condensing |
|---|---|
| Dimensions: | 440 x 210 x 44 mm, 19” standard rack mounting, width, 1U height |
| Weight: | 3.46 kg |
| Diagnostic LEDs: | Power (per device), Link/Activity/Speed (per 10/100/1000 Mbps port), Link/Activity/Speed (per combo port) |
| MTBF: | 400,667 hours |
| Certifications and Safety: | CE Class A, cUL, CE LVD |
You must be logged in to post a review.
Related products
D-Link DGS-1008A 8-Port Gigabit Desktop-Switch
D-Link DES-1050G 48-Ports Rack-Mountable Switch
The D-Link DES-1050G 48-Ports Rack-Mountable Switch has the following features:
• Has 48 10/100 Mbps Copper Ethernet Ports.
• Also has Two (2) Copper/SFP Gigabit ports.
• Provides a 13.6 Gbps Switch Capacity.
• Auto MDI/MDIX for Each Port.
• Full/Half-Duplex Support for Each Port.
• 802.3x Flow Control Per Port for Data Loss.
• Secure Store-and-Forward Switching Scheme Per-port.
• Auto-correction of reverse twisted-pair polarity.
• Standard 19-inch rack-mount size.
• Plug and play ports.
D-Link DAP-3315 Wireless Outdoor Access-Point
The D-Link DAP-3315 Wireless Outdoor Access-Point has the following features:
- The DAP-3315 Transfer speeds up to 300 Mbps in the 2.4 GHz band allow for faster downloads and instant communication.
- 12dBi High-Gain Directional Antenna for high-power output to ensure wide coverage.
- Has IPX5 Certified housing, hence suitable for outdoor usage.
- Supports Power over Ethernet for simpler installation with less cable clutter (D-Link proprietary power adaptor also included).
- Simple, clean-line design, ideal for subtle visibility when wall or pole mounted (mounting hardware included).
- Supports up to 8 VLANs for enhanced network management and multiple SSID setups.
- Supports WPA2 - WiFi security for more protection.
- Two (2) 10/100 Fast Ethernet LAN port to provide backhaul to the wired network (one port supports PoE).
- Supports multiple AP modes to ensure performance optimization based on your network’s needs.
- MAC Address Filtering and WLAN Partitioning ensure ultimate access control of your network.
D-Link DAP-3310 Outdoor Access-Point
The D-Link DAP-3310 Outdoor Access-Point has the following features:
- The DAP3310 Provides 2.4GHz Wireless N300 Outdoor Access Point-Remove.
- Wireless N300 Mbps 2.4GHz Single Band Outdoor Access Point with POE Pass-Through.
- Two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion.
- Built-in 10 dBi sector antenna with high power output ensuring that wireless coverage.
- Weather-proof design (IPX6) built to withstand harsh environments.
- Supports multiple operation modes – AP,WDS with AP, Client, Repeater, WISP Client & Repeater.
- Supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic.
- Provides WLAN partitioning for deployments such as wireless hot spots.
D-Link DAP-2610 Wireless Dual-Band Access-Point
The D-Link DAP-2610 Wireless Dual-Band Access-Point has the following features:
- The D-Link DAP-2610 is easy to manage with D-Link’s free management software-based solution, Nuclias Connect.
- Has a superior throughput with Dual-band transfer speeds up to 400 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band.
- MU-MIMO technology improves connection by allowing data transfer with multiple devices at the same time.
- Band Steering makes sure connected devices get the best available frequency band.
- Beamforming effectively concentrates signal at the area it is required most, improve both speed and stability.
- 10/100/1000 Gigabit LAN port for high-capacity backhaul to the wired network.
- Supports multiple AP modes to ensure optimization based on your network’s needs.
- Supports Power over Ethernet (802.3af) for simpler installation with less cable clutter.
- Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included).
- Supports multiple VLANs for enhanced network management and up to 16 SSID setups.
- Supports WPA - WiFi security for more protection.
- MAC Address Filtering and WLAN Partitioning ensure control of your network’s access.
- Works as a standalone AP or as part of a centralized, scalable multi-device deployment.
D-Link DAP-1160 Wireless Access Point
D-Link DMC-700SC Gigabit Multimode Media-Converter
The D-Link DMC-700SC Gigabit Multimode Media-Converter has the following features:
- One channel 10/100/1000 Mbps Ethernet to 100/1000 Mbps fiber optic conversion.
- Plug-and-Play, no additional software required.
- Can be used standalone or installed in the DMC-1000 chassis.
- Half or full-duplex operation.
- Auto-MDI/MDIX.
D-Link DES-1210-28 28-Port Ethernet Managed-Switch
The D-Link DES-1210-28 28-Port Ethernet Managed-Switch has the following features:
- 24 10/100BASE-TX And Two (2) 10/100/1000BASE-T ports.
- tWO (2) 10/100/1000BASE-T/SFP Combo ports.
- Supports IEEE 802.1p QoS.
- CoS by DSCP/ToS/TCP/UDP/IPv6 traffic class.
- Bandwidth Control.
- Auto Surveillance VLAN.
- Auto Voice VLAN.
- Cable Diagnostics.

Reviews
There are no reviews yet.