D-Link DMC 520SC 2Port Single-mode Media-Converter
Original price was: KSh7,500.KSh6,000Current price is: KSh6,000.
The D-Link DMC 520SC 2Port Single-mode Media-Converter has the following Features:
- Has (1) 10/100BASE-TX RJ-45 port to 1, 100BASE-FX SC port.
- Ethernet: 10 Mbps/20 Mbps (half-duplex/full-duplex)
- Fast Ethernet: 100 Mbps/200 Mbps (half-duplex/full-duplex)
- Half-duplex/full-duplex
D-Link DMC 520SC 2Port Single-mode Media-Converter True-Tech
The D-Link DMC 520SC 2Port Single-mode Media-Converter comes with One (1) 10/100BASE-TX RJ-45 port to 1, 100BASE-FX SC port.
In addition it has an Ethernet 10 Mbps/20 Mbps (half-duplex/full-duplex)
And a Fast Ethernet of 100 Mbps/200 Mbps (half-duplex/full-duplex)
Mount up to 14 media converters in the specially designed DMC-1014 Media Converter Chassis.
Has a dedicated power supply for powering the chassis and all installed media converters, thus highly recommended.
Hot-swappable when mounted.
Front panel LEDs for instant status feedback
Product Specifications:
| Number of Ports: | Comes with One (1) 10/100BASE-TX RJ-45 port And One (1) 100BASE-FX SC port |
|
| Standards: | IEEE 802.3 for 10BASE-T/F IEEE 802.3u for 100BASE-TX/FX |
|
| Data Transfer Rate: | Ethernet : 10 Mbps/20 Mbps (half-duplex/full-duplex) Fast Ethernet : 100 Mbps/200 Mbps (half-duplex/full-duplex) |
|
| Duplex Mode: | Half-duplex/full-duplex | |
| Media Types: | 10BASE-T: 2-pair Cat. 3/4/5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 10/100BASE-TX: 2-pair Cat. 5/5e, Unshielded Twisted Pair (UTP) (up to 100 m) 100BASE-FX: Single mode-fi e optic cable with SC connector (up to 20 km) |
|
| Media Exchange Interface: | Auto-MDI/MDIX | |
| Transmission Mode: | Store-and-forward | |
| Forwarding Rate: | Full wire-speed forwarding rate | |
| Diagnostic LEDs: | The device displays for :
Power |
|
You must be logged in to post a review.
Related products
D-Link DAP-3310 Outdoor Access-Point
The D-Link DAP-3310 Outdoor Access-Point has the following features:
- The DAP3310 Provides 2.4GHz Wireless N300 Outdoor Access Point-Remove.
- Wireless N300 Mbps 2.4GHz Single Band Outdoor Access Point with POE Pass-Through.
- Two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion.
- Built-in 10 dBi sector antenna with high power output ensuring that wireless coverage.
- Weather-proof design (IPX6) built to withstand harsh environments.
- Supports multiple operation modes – AP,WDS with AP, Client, Repeater, WISP Client & Repeater.
- Supports 802.1Q VLAN Tagging, operating with multiple SSIDs to segment traffic.
- Provides WLAN partitioning for deployments such as wireless hot spots.
D-Link DAP-2360 Wireless Access-Point
The D-Link DAP-2360 Wireless Access-Point has the following features:
- Throughput of up to 300 Mbps.
- Supports Power over Ethernet.
- Clean-line design, ideal for subtle visibility when wall mounted.
- Supports up to 8 VLANs.
- Wireless network supports both Personal and Enterprise versions of WPA and WPA2.
- Gigabit LAN port for high-capacity backhaul to the wired network.
- Supports multiple AP modes to ensure performance optimization based on network needs.
D-Link DAP-2610 Wireless Dual-Band Access-Point
The D-Link DAP-2610 Wireless Dual-Band Access-Point has the following features:
- The D-Link DAP-2610 is easy to manage with D-Link’s free management software-based solution, Nuclias Connect.
- Has a superior throughput with Dual-band transfer speeds up to 400 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band.
- MU-MIMO technology improves connection by allowing data transfer with multiple devices at the same time.
- Band Steering makes sure connected devices get the best available frequency band.
- Beamforming effectively concentrates signal at the area it is required most, improve both speed and stability.
- 10/100/1000 Gigabit LAN port for high-capacity backhaul to the wired network.
- Supports multiple AP modes to ensure optimization based on your network’s needs.
- Supports Power over Ethernet (802.3af) for simpler installation with less cable clutter.
- Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included).
- Supports multiple VLANs for enhanced network management and up to 16 SSID setups.
- Supports WPA - WiFi security for more protection.
- MAC Address Filtering and WLAN Partitioning ensure control of your network’s access.
- Works as a standalone AP or as part of a centralized, scalable multi-device deployment.
D-Link DMC-515SC Multimode Media-Converter
The D-Link DMC-515SC Multimode Media-Converter has the following features:
- The DMC-515C converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15KM apart.
- The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals. Maximum fiber cable distance is 15 - 60 km. 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
- The DMC-515SC media converter supports maximum 15 km fiber cable distance.
- The media converters come with their own solid metal case housing, LED status indicators and external AC power adapters.
- They can be used as stand-alone converters, or installed in a DMC-1000 chassis.
D-Link DGS-F1016P 16-Port Gigabit PoE Switch
The D-Link DGS-F1016P 16-Port Gigabit PoE Switch has the following features:
- 16 10/100/1000Mbps ports
- 2 Gigabit SFP uplink ports
- 250 watts available for Pot
- Flow control for protection against data loss
- The D-Link DGS-F1016P Gigabit Pot Switch comes with 16 10/100/1000 Mbps Pot ports & 2 Gigabit SP uplink ports.
D-Link DES-1005A 5Port Switch
The D-Link DES-1005A 5Port Switch has the following Features:
- Inexpensive Fast Ethernet solution for Home/SOHO.
- Five 10/100 Mbps Fast Ethernet ports.
- Auto MDI/MDIX crossover for all ports.
- Store-and-forward switching scheme.
- Full/half-duplex for Ethernet/Fast Ethernet speeds.
- IEEE 802.3x Flow Control.
- Plug-and-play installation.
- RoHS compliant.
Reviews
There are no reviews yet.