D-Link DES-1050G 48-Ports Rack-Mountable Switch
Original price was: KSh22,000.KSh19,000Current price is: KSh19,000.
The D-Link DES-1050G 48-Ports Rack-Mountable Switch has the following features:
• Has 48 10/100 Mbps Copper Ethernet Ports.
• Also has Two (2) Copper/SFP Gigabit ports.
• Provides a 13.6 Gbps Switch Capacity.
• Auto MDI/MDIX for Each Port.
• Full/Half-Duplex Support for Each Port.
• 802.3x Flow Control Per Port for Data Loss.
• Secure Store-and-Forward Switching Scheme Per-port.
• Auto-correction of reverse twisted-pair polarity.
• Standard 19-inch rack-mount size.
• Plug and play ports.
D-Link DES-1050G 48-Ports Rack-Mountable Switch True-Tech
The D-Link DES-1050G 48-Ports Rack-Mountable Switch is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements.
In addition the switch comes with 48x 10/100 Mbps Copper Ethernet Ports, and Two (2) Copper/SFP Gigabit ports.
Equally important it has a 13.6 Gbps Switch Capacity.
It also supports 802.3x Flow Control Per Port, thus ensuring no Data Loss
| Product Specifications: | |
|---|---|
| Standards: | – IEEE 802.3 10BASE-T Ethernet – IEEE 802.3u 100BASE-TX Fast Ethernet – IEEE 802.3ab 1000BASE-T Gigabit Ethernet – ANSI/IEEE 802.3 Nway auto-negotiation – IEEE 802.3x Flow Control |
| Number of Ports: | – 48 10/100BASE-TX ports with auto MDI/MDIX – 2 10/100/1000BASE-T ports with auto MDI/MDIX |
| Full/Half Duplex Support: | – Ethernet/Fast Ethernet: full/half duplex – Gigabit: full duplex |
| Flow Control: | – Half duplex mode: back pressure – Full duplex mode: 802.3x flow control |
| LED Report: | – Per device: Power – Per port: Link/Act |
| Switch Fabric: | 13.6Gbps |
| Transmission Method: | Store-and-forward |
| MAC Address Table: | 8K entries per device |
| MAC Address Learning | Automatic update |
| RAM Buffer: | 3.2MBit per device |
|---|---|
| Packet Filtering/Forwarding Rate: | – 10BASE-T : 14,880 pps per port – 100BASE-TX: 148,800 pps per port – Gigabit: 1,488,000 pps per port |
| Power Input: | 100 to 240 VAC, 50/60 Hz Internal universal power supply |
| Dimensions: | 441 (W) x 309 (D) x 44 (H) mm 19-inch rack-mount width, 1 U height |
| Power Consumption: | 24 watts |
| Operating Temperature: | 0 to 40 C |
| Storage Temperature: | -25 to 55 C |
| Weight: | 3.7 kg |
| Humidity: | 0% to 95% non-condensing |
|---|---|
| Emission (EMI): | – FCC Class A – CE |
| Safety: | CSA International |
You must be logged in to post a review.
Related products
D-Link DGS-1016A 16-Port Gigabit-Switch
The D-Link DGS-1016A 16-Port Gigabit-Switch has the following features:
- 16 Gigabit Ethernet ports for fast network speeds.
- Fanless design for silent operation.
- Auto MDI/MDI-X crossover for all ports.
- Full/half-duplex for Ethernet/Fast Ethernet speeds.
- Supports 9,216 Bytes Jumbo Frames.
- RoHS-compliant.
- Hassle-free plug and play installation.
D-Link DES-F1016P-E 16-Port PoE-Switch
The D-Link DES-F1016P-E 16-Port PoE-Switch has the following features:
- Has Sixteen (16) 10/10OMbps Fast Ethernet ports.
- Comes with One (1) Gigabit Combo (RJ45/SFP) uplink port.
- 150 watts available for PoE.
- Flow control for protection against data loss.
- Maximum distance of 250m.
- Plug-and-play installation.
- IEEE 802.3x Flow Control.
- Auto MDI I MDIX crossover for all ports.
- Fanless device.
D-Link DES-1016C 16-Port Switch
The DES-1016C D-LINK 16 Port Switch has the following features:
- 16 Gigabit LAN ports for high-speed wired connections.
- Plug-and-play installation for convenience.
- Auto-negotiation on all ports.
- Half/full-duplex, auto MDI/MDIX, and store-and-forward switching.
- Full wire-speed data transmission.
- Energy-efficient design.
- Secure store-and-forward switching scheme.
- Supports 9 216 byte jumbo frames.
- Back pressure at half-duplex operation.
- Wire-speed reception and transmission.
- Store and-Forward switching method.
- QoS (4 queues, strict mode).
D-Link DAP-3315 Wireless Outdoor Access-Point
The D-Link DAP-3315 Wireless Outdoor Access-Point has the following features:
- The DAP-3315 Transfer speeds up to 300 Mbps in the 2.4 GHz band allow for faster downloads and instant communication.
- 12dBi High-Gain Directional Antenna for high-power output to ensure wide coverage.
- Has IPX5 Certified housing, hence suitable for outdoor usage.
- Supports Power over Ethernet for simpler installation with less cable clutter (D-Link proprietary power adaptor also included).
- Simple, clean-line design, ideal for subtle visibility when wall or pole mounted (mounting hardware included).
- Supports up to 8 VLANs for enhanced network management and multiple SSID setups.
- Supports WPA2 - WiFi security for more protection.
- Two (2) 10/100 Fast Ethernet LAN port to provide backhaul to the wired network (one port supports PoE).
- Supports multiple AP modes to ensure performance optimization based on your network’s needs.
- MAC Address Filtering and WLAN Partitioning ensure ultimate access control of your network.
D-Link DMC-700SC Gigabit Multimode Media-Converter
The D-Link DMC-700SC Gigabit Multimode Media-Converter has the following features:
- One channel 10/100/1000 Mbps Ethernet to 100/1000 Mbps fiber optic conversion.
- Plug-and-Play, no additional software required.
- Can be used standalone or installed in the DMC-1000 chassis.
- Half or full-duplex operation.
- Auto-MDI/MDIX.
D-Link DMC-515SC Multimode Media-Converter
The D-Link DMC-515SC Multimode Media-Converter has the following features:
- The DMC-515C converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15KM apart.
- The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals. Maximum fiber cable distance is 15 - 60 km. 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
- The DMC-515SC media converter supports maximum 15 km fiber cable distance.
- The media converters come with their own solid metal case housing, LED status indicators and external AC power adapters.
- They can be used as stand-alone converters, or installed in a DMC-1000 chassis.
D-Link DGS-F1016P 16-Port Gigabit PoE Switch
The D-Link DGS-F1016P 16-Port Gigabit PoE Switch has the following features:
- 16 10/100/1000Mbps ports
- 2 Gigabit SFP uplink ports
- 250 watts available for Pot
- Flow control for protection against data loss
- The D-Link DGS-F1016P Gigabit Pot Switch comes with 16 10/100/1000 Mbps Pot ports & 2 Gigabit SP uplink ports.
Reviews
There are no reviews yet.