TP-Link TL-FC111PB-20 100Mbps WDM Media Converter
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter has the following Features:
- The device converts the data between fiber (optical signal) and copper (electric signal).
- It also Extends fiber distance up to 20 km.
- The 802.3af PoE output makes remote camera deployment easier and more convenient.
- WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
- Wide operating temperature (0–50 ℃) with reliability.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
TP-Link TL-FC111PB-20 100Mbps WDM Media Converter True-Tech
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter converts the data between fiber (optical signal) and copper (electric signal).
It also Extends fiber distance up to 20 km, thus highly recommended for networking applications.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
It also has a Wide operating temperature (0–50 ℃), thus highly reliable.
Equally important it also supports auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
Product Specifications:
| NETWORK: | |
|---|---|
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
| HARDWARE FEATURES: | |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | 48 V/0.5 A |
| LED | PWR, Link/Act, PoE |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| Wave Length | 1310 nm TX, 1550 nm RX |
| ANTENNA: | |
|---|---|
| Connector Type | The device comes with One (1) 10/100 Mbps PoE RJ45 port, and One (1) 100 Mbps SC fiber port |
| ENVIRONMENT: | |
|---|---|
| Operating Temperature | For optimal performance it requires : 0–50 °C (32–122 °F) Operating Temperature |
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| MEDIA CONVERTER & MODULE: | |
|---|---|
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
You must be logged in to post a review.
Related products
TP-Link MC100CM Media Converter
The TP-Link MC100CM Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 2km.
TP-Link EAP120 Wireless Access-Point
The TP-Link EAP120 Wireless Access-Point has the following features:
- EAP Controller Software enables administrators to easily manage hundreds of EAPs.
- Support Power over Ethernet（802.3af）for convenient and affordable installation.
- Simple mounting design to easily mount to a wall or ceiling.
- Captive portal provides one convenient method of authentication for WiFi guests.
- WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN.
- Gigabit Ethernet port enables bandwidth-intensive application or multimedia transferring.
TP-Link EAP110 Ceiling-Mount Access-Point
The TP-Link EAP110 Ceiling-Mount Access-Point has the following features:
- EAP Controller Software enables administrators to easily manage hundreds of EAPs.
- Supports passive Poe, thus convenient installation up to 100meters.
- Ceiling mounting design with chassis make it easy to deploy on a wall or ceiling.
- Captive portal provides one convenient method of authentication for Wi-Fi guests.
- Multi-SSID divides multiple wireless networks for different users.
- Enterprise class Wi-Fi security help to decrease network security threats.
TP-Link TL-T4u Dual-Band USB-Adapter
The TP-Link TL-T4u Adapter has the following features:
- Ultra-fast Wi-Fi.
- Dual Band Wireless.
- High gain antennas.
- MU-MIMO.
- Super Speed USB 3.0 Port.
- WPS Button.
TP-Link CPE220 2.4GHz Outdoor Access-Point
The TP-Link CPE220 2.4GHz Outdoor Access-Point has the following features:
- Has an In- built 12dBi 2x2 dual-polarized directional MIMO antenna.
- Adjustable transmission power from 0 to 30dBm/1000mw.
- System-level optimizations for more than 13km long range wireless transmission.
- TP-LINK Pharos MAXtream TDMA technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications.
- Centralized Management System – Pharos Control.
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes.
- Passive PoE Adapter supports up to 60 meter.
TP-Link TL-WR840N 300Mbps Wireless-Router
The TP-Link TL-WR840N 300Mbps Wireless-Router has the following features:
- Connectivity: Wireless Communication Standard; 802.11bgn
- Ports: 1 USB 2.0 Port for LTE/HSPA /HSUPA/HSDPA/UMTS/EVDO USB Modem 1 10/100Mbps WAN Port, 4 10/100Mbps LAN
- Package contains: 3G/4G Wireless N Router TL-WR840N 2 Antennas, Power supply unit, Ethernet Cable Resource CD, Quick
Reviews
There are no reviews yet.