TP-Link TL-FC111PB-20 100Mbps WDM Media Converter
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter has the following Features:
- The device converts the data between fiber (optical signal) and copper (electric signal).
- It also Extends fiber distance up to 20 km.
- The 802.3af PoE output makes remote camera deployment easier and more convenient.
- WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
- Wide operating temperature (0–50 ℃) with reliability.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
TP-Link TL-FC111PB-20 100Mbps WDM Media Converter True-Tech
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter converts the data between fiber (optical signal) and copper (electric signal).
It also Extends fiber distance up to 20 km, thus highly recommended for networking applications.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
It also has a Wide operating temperature (0–50 ℃), thus highly reliable.
Equally important it also supports auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
Product Specifications:
| NETWORK: | |
|---|---|
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
| HARDWARE FEATURES: | |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | 48 V/0.5 A |
| LED | PWR, Link/Act, PoE |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| Wave Length | 1310 nm TX, 1550 nm RX |
| ANTENNA: | |
|---|---|
| Connector Type | The device comes with One (1) 10/100 Mbps PoE RJ45 port, and One (1) 100 Mbps SC fiber port |
| ENVIRONMENT: | |
|---|---|
| Operating Temperature | For optimal performance it requires : 0–50 °C (32–122 °F) Operating Temperature |
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| MEDIA CONVERTER & MODULE: | |
|---|---|
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
You must be logged in to post a review.
Related products
TP-Link EAP110 Ceiling-Mount Access-Point
The TP-Link EAP110 Ceiling-Mount Access-Point has the following features:
- EAP Controller Software enables administrators to easily manage hundreds of EAPs.
- Supports passive Poe, thus convenient installation up to 100meters.
- Ceiling mounting design with chassis make it easy to deploy on a wall or ceiling.
- Captive portal provides one convenient method of authentication for Wi-Fi guests.
- Multi-SSID divides multiple wireless networks for different users.
- Enterprise class Wi-Fi security help to decrease network security threats.
TP Link CPE520 5GHz Outdoor Access-Point
The TP Link CPE520 5GHz Outdoor Access-Point has the following features:
- Built-in 16dBi 2x2 dual-polarized directional MIMO antenna.
- Adjustable transmission power from 0 to 27dBm/500mw.
- System-level optimizations for more than 20km long range wireless transmission.
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access).
- Centralized Management System – Pharos Control.
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes.
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely.
TP-Link CPE210 2.4GHz Outdoor Access-Point
The TP-Link CPE210 2.4GHz Outdoor Access-Point has the following features:
- Built-in 9dBi 2×2 dual-polarized directional MIMO antenna.
- Adjustable transmission power from 0 to 27dBm/500mw.
- System-level optimizations for more than 5km long range wireless transmission.
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications.
- Centralized Management System – Pharos Control.
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes.
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely.
TP-Link Archer AX600 Wi-Fi-Router
The TP-Link Archer AX600 Wi-Fi-Router has the following features:
- Wi-Fi 6 (802.11ax)
- Up to 6000 Mb/s
- 2.4 GHz / 5 GHz (Dual-Band)
- 8 x External Antennas
- 8 x 10/100/1000 Mb/s LAN Ports
- 1 x 2.5 Gb/s WAN Port
- USB 3.0/3.1 Type-A and Type-C Ports
- Smart Connect
- Alexa and IFTTT Integration
- Bluetooth and Smartphone Configuration.
TP-Link M7200 4G LTE Mobile-Wi-Fi
The TP-Link M7200 4G LTE Mobile-Wi-Fi has the following features:
- This high speed WiFi router enables you to access the internet on 10 devices, anywhere in the world.
- It comes unlocked so you can use any SIM card inside.
- 4G with up to 150 mbps download speed
- 50mbps upload speed.
- Easy management with the tpMiFi App
- 2000mAh battery for 8 hours of usage
- No configuration – just insert a SIM card and turn it on to enjoy high speed internet access.
- Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions.
- Wireless Connectivity.
TP-Link M7350 LTE MiFi
The TP-Link M7350 LTE MiFi has the following features:
- Create Wi-Fi hotspot on the go for work and entertainment
- 4G LTE supports fast speed internet connection with download rate up to 150 Mbps, selectable 2.4 GHz or 5 GHz dual band Wi-Fi
- Powerful battery backup for up to 10 hours of working
- Easy to use, no software to install
- Unlocked for any operator’s SIM card
TP-Link TL-WR840N 300Mbps Wireless-Router
The TP-Link TL-WR840N 300Mbps Wireless-Router has the following features:
- Connectivity: Wireless Communication Standard; 802.11bgn
- Ports: 1 USB 2.0 Port for LTE/HSPA /HSUPA/HSDPA/UMTS/EVDO USB Modem 1 10/100Mbps WAN Port, 4 10/100Mbps LAN
- Package contains: 3G/4G Wireless N Router TL-WR840N 2 Antennas, Power supply unit, Ethernet Cable Resource CD, Quick
Reviews
There are no reviews yet.