TP-Link TL-FC111PB-20 100Mbps WDM Media Converter
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter has the following Features:
- The device converts the data between fiber (optical signal) and copper (electric signal).
- It also Extends fiber distance up to 20 km.
- The 802.3af PoE output makes remote camera deployment easier and more convenient.
- WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
- Wide operating temperature (0–50 ℃) with reliability.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
TP-Link TL-FC111PB-20 100Mbps WDM Media Converter True-Tech
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter converts the data between fiber (optical signal) and copper (electric signal).
It also Extends fiber distance up to 20 km, thus highly recommended for networking applications.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
It also has a Wide operating temperature (0–50 ℃), thus highly reliable.
Equally important it also supports auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
Product Specifications:
| NETWORK: | |
|---|---|
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
| HARDWARE FEATURES: | |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | 48 V/0.5 A |
| LED | PWR, Link/Act, PoE |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| Wave Length | 1310 nm TX, 1550 nm RX |
| ANTENNA: | |
|---|---|
| Connector Type | The device comes with One (1) 10/100 Mbps PoE RJ45 port, and One (1) 100 Mbps SC fiber port |
| ENVIRONMENT: | |
|---|---|
| Operating Temperature | For optimal performance it requires : 0–50 °C (32–122 °F) Operating Temperature |
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| MEDIA CONVERTER & MODULE: | |
|---|---|
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
You must be logged in to post a review.
Related products
TP-Link MC100CM Media Converter
The TP-Link MC100CM Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 2km.
TP-Link M7310 4G LTE Mobile-MiFi
The TP-Link M7310 4G LTE Mobile-MiFi has the following features:
- Device supports 4G LTE with up to 150Mbps download and 50Mbps upload speeds
- Supports up to 11 devices simultaneously(10 Wireless + 1 Wired)
- Selectable 2.4GHz or 5GHz dual band Wi-Fi at speeds of 300Mbps
- All useful information at a glance with screen display
- Also has a 2000mAh battery for up to 10 hours of working
- Equipped with a micro SD card slot for up to 32GB of optional storage
- Easy management with the tpMiFi App
TP-Link M7300 LTE-Advanced Mobile Wi-Fi
The TP-Link M7300 LTE-Advanced Mobile Wi-Fi has the following features:
- Share 4G connection with up to 150Mbps download/50Mbps upload speeds.
- Can supports up to 11 devices simultaneously where 10 are Wireless+1 Wired.
- Has a 2000mAh battery for 10 hours of usage.
- Has a Micro SD card slot that supports up to 32GB of optional storage.
- Easy management with the tpMiFi App.
TP-Link EAP320 AC1200 Wireless Gigabit Access Point
TP-Link TP-Link EAP320 AC1200 Wireless Gigabit Access Point has the following features:
- The Access point provides speeds of up to 1.2Gbps over concurrent dual band 802.11ac Wi-Fi.
- Airtime Fairness, Beamforming, and Band Steering Technologies guarantee optimal RF performance.
- Free EAP Controller Software lets administrators easily manage hundreds of EAPs.
- Captive portal provides a convenient method for guest authentication.
- Power over Ethernet (802.3at) support and simple mounting design allow for flexible deployment and convenient installation.
TP-Link EAP110 Ceiling-Mount Access-Point
The TP-Link EAP110 Ceiling-Mount Access-Point has the following features:
- EAP Controller Software enables administrators to easily manage hundreds of EAPs.
- Supports passive Poe, thus convenient installation up to 100meters.
- Ceiling mounting design with chassis make it easy to deploy on a wall or ceiling.
- Captive portal provides one convenient method of authentication for Wi-Fi guests.
- Multi-SSID divides multiple wireless networks for different users.
- Enterprise class Wi-Fi security help to decrease network security threats.
TP-Link CPE510 5GHZ Outdoor Access-Point
The TP-Link CPE510 5GHZ Outdoor Access-Point has the following features:
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna.
- Adjustable transmission power from 0 to 23dBm/200mw.
- System-level optimizations for more than 15km long range wireless transmission.
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access).
- Centralized Management System – Pharos Control.
- AP / Client / AP Router / AP Client Router (WISP) operation modes.
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely.
TP-Link WA-801N 300Mbps Wireless Access-Point
The TP-Link WA-801N 300Mbps Wireless Access-Point has the following features:
- 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming.
- Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP.
- Easily setup a WPA encrypted secure connection at a push of the WPS button.
- Flexible deployment with included Passive Power over Ethernet Injector.
TP-Link TL-WR840N 300Mbps Wireless-Router
The TP-Link TL-WR840N 300Mbps Wireless-Router has the following features:
- Connectivity: Wireless Communication Standard; 802.11bgn
- Ports: 1 USB 2.0 Port for LTE/HSPA /HSUPA/HSDPA/UMTS/EVDO USB Modem 1 10/100Mbps WAN Port, 4 10/100Mbps LAN
- Package contains: 3G/4G Wireless N Router TL-WR840N 2 Antennas, Power supply unit, Ethernet Cable Resource CD, Quick
Reviews
There are no reviews yet.