TP-Link TL-FC111PB-20 100Mbps WDM Media Converter
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter has the following Features:
- The device converts the data between fiber (optical signal) and copper (electric signal).
- It also Extends fiber distance up to 20 km.
- The 802.3af PoE output makes remote camera deployment easier and more convenient.
- WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
- Wide operating temperature (0–50 ℃) with reliability.
- Auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
TP-Link TL-FC111PB-20 100Mbps WDM Media Converter True-Tech
The TP-Link TL-FC111PB-20 100Mbps WDM Media Converter converts the data between fiber (optical signal) and copper (electric signal).
It also Extends fiber distance up to 20 km, thus highly recommended for networking applications.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to transmit and receive data over one single fiber strand instead of two.
It also has a Wide operating temperature (0–50 ℃), thus highly reliable.
Equally important it also supports auto-negotiation of Half-Duplex/Full-Duplex transfer mode.
Product Specifications:
| NETWORK: | |
|---|---|
| Standards and Protocols | IEEE802.3, IEEE802.3i, IEEE802.3u |
| HARDWARE FEATURES: | |
|---|---|
| Network Media | 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (≤100 m) |
| Power Supply | 48 V/0.5 A |
| LED | PWR, Link/Act, PoE |
| Dimensions ( W x D x H ) | 3.7×2.9×1.1 in (94.5×73.0×27.0 mm) |
| Wave Length | 1310 nm TX, 1550 nm RX |
| ANTENNA: | |
|---|---|
| Connector Type | The device comes with One (1) 10/100 Mbps PoE RJ45 port, and One (1) 100 Mbps SC fiber port |
| ENVIRONMENT: | |
|---|---|
| Operating Temperature | For optimal performance it requires : 0–50 °C (32–122 °F) Operating Temperature |
| Storage Temperature | -40–70 °C (-40–158 °F) |
| Operating Humidity | 10–90% RH non-condensing |
| Storage Humidity | 5–90% RH non-condensing |
| MEDIA CONVERTER & MODULE: | |
|---|---|
| Fiber Type | 9/125 μm single-mode fber (≤20 km) |
You must be logged in to post a review.
Related products
TP-Link MC100CM Media Converter
The TP-Link MC100CM Media Converter has the following features:
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely.
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Extends fiber distance up to 2km.
TP-Link M7300 LTE-Advanced Mobile Wi-Fi
The TP-Link M7300 LTE-Advanced Mobile Wi-Fi has the following features:
- Share 4G connection with up to 150Mbps download/50Mbps upload speeds.
- Can supports up to 11 devices simultaneously where 10 are Wireless+1 Wired.
- Has a 2000mAh battery for 10 hours of usage.
- Has a Micro SD card slot that supports up to 32GB of optional storage.
- Easy management with the tpMiFi App.
TP-Link EAP320 AC1200 Wireless Gigabit Access Point
TP-Link TP-Link EAP320 AC1200 Wireless Gigabit Access Point has the following features:
- The Access point provides speeds of up to 1.2Gbps over concurrent dual band 802.11ac Wi-Fi.
- Airtime Fairness, Beamforming, and Band Steering Technologies guarantee optimal RF performance.
- Free EAP Controller Software lets administrators easily manage hundreds of EAPs.
- Captive portal provides a convenient method for guest authentication.
- Power over Ethernet (802.3at) support and simple mounting design allow for flexible deployment and convenient installation.
TP-Link EAP220 Gigabit Access-Point
The TP-Link EAP220 Gigabit Ceiling Mount Access-Point has the following features:
- EAP Controller Software enables administrators to easily manage hundreds of EAPs.
- Support Power over Ethernet(802.3af)for convenient and affordable installation.
- Simple mounting design to easily mount to a wall or ceiling.
- Captive portal provides one convenient method of authentication for Wi-Fi guests.
- WPA/WPA2-enterprise, 802.1X with RADIUS secure authentication and rogue access point detection ensure the security of WLAN.
- Gigabit Ethernet port enables bandwidth-intensive application or multimedia transferring.
TP-Link TL-T4u Dual-Band USB-Adapter
The TP-Link TL-T4u Adapter has the following features:
- Ultra-fast Wi-Fi.
- Dual Band Wireless.
- High gain antennas.
- MU-MIMO.
- Super Speed USB 3.0 Port.
- WPS Button.
TP-Link Archer C2-AC750 Wireless-Gigabit-Router
The TP-Link C2 AC750 Wireless Gigabit Router [Archer] has the following features:
- Simultaneous 2.4GHz 300Mbps and 5GHz 433Mbps connections for 733Mbps of total available bandwid
- Supports 802.11ac standard – the next generation of Wi-Fi
- 2 detachable external antennas provide stable omnidirectional signal and superior wireless coverage
- Full gigabit ports ensure ultrafast data transfer speeds
- USB port – share a printer locally and files & media with networked devices or remotely via FTP server.
TP-Link M7200 4G LTE Mobile-Wi-Fi
The TP-Link M7200 4G LTE Mobile-Wi-Fi has the following features:
- This high speed WiFi router enables you to access the internet on 10 devices, anywhere in the world.
- It comes unlocked so you can use any SIM card inside.
- 4G with up to 150 mbps download speed
- 50mbps upload speed.
- Easy management with the tpMiFi App
- 2000mAh battery for 8 hours of usage
- No configuration – just insert a SIM card and turn it on to enjoy high speed internet access.
- Supports the latest generation 4G FDD/TDD-LTE, compatible with the network of most countries and regions.
- Wireless Connectivity.
TP-Link M7350 LTE MiFi
The TP-Link M7350 LTE MiFi has the following features:
- Create Wi-Fi hotspot on the go for work and entertainment
- 4G LTE supports fast speed internet connection with download rate up to 150 Mbps, selectable 2.4 GHz or 5 GHz dual band Wi-Fi
- Powerful battery backup for up to 10 hours of working
- Easy to use, no software to install
- Unlocked for any operator’s SIM card
Reviews
There are no reviews yet.